Area Artigianale - C.da Sasi Alcamo 91011 - ITALY
+39 0924 502655

Technical specification


All Sormec cranes include:

  • international Marine Coatings Paint Treatment;
  • paint color according to ownera��s choice;
  • all materials used are sea water resistant;
  • standard work temperature range from -20A�C to +45A�C;
  • powerful rotation through slewing ring unit and motor reduction gear;
  • 360A� Continuous rotation;
  • rotating hydraulic distributor;
  • all electrical equipment will be in standard IP 56 protection;
  • simultaneous operation of 2 functions;
  • emergency stop push button;
  • cylinder rods double chromium plated with thickness from 60 to 80 micron;
  • the hydraulic system is equipped with overcenter safety valves;
  • the flexible hoses are made according to the EN 853 2SN, EN 856 4SH, EN857 1SC while stiff hoses and fittings follow the ISO 8434-1 (DIN 2353) standards;
  • bushes made in bronze with greasing point;
  • pins in 39NiCrMo3 material;
  • hook in carbon steel GSC and Alloy steel GSA, with safety block;
  • control position of the crane is fixed on the rotating turret by a platform with an operator seat;
  • a metallic plate showing: type, part number, year;
  • full set of operation and operation manual.

Special equipment:

  • certification for lifting of personal;
  • man riding winch;
      The winch is approved and certified for personnel lifting, equipped with a mechanical brake, separate and independent hydraulic circuit that reacts directly on the winch drum; the hydraulic circuit furnish the possibility to individually test the secondary brake to verify ita��s efficiency. All the cylindera��s equipped with independent circuits that supply the hydraulic brake, using an overcenter valve directly connected to every single cylinder. In the man-riding mode the following function are maintained:

    • Brake automatically active when the levers are in neutral position and in the case of emergency stop being active or the event of power failure;
    • The crane equipped with a system to recuperate personnel in the case of emergency;
    • Manual overload protection system (MOPS),if present, shall be overridden.
  • double drum hydraulic winch with double rope system;
  • Atex certification for crane and components;
  • arctic work temperature (-40A�C);
  • manual overload protection system (MOPS);
  • automatic overload protection system (AOPS);
  • constant tension rope system (CT)
  • active heave compensation (AHC);
  • emergency stop push button;

A wide range of optional equipment is available to be installed in our cranes:

    • oil cooler (water/oil or air/oil) in the hydraulic system;
    • oil heating elements in the hydraulic system;
    • operator cabin (with A/C):
        Sormec installs operator cabins as per clients requests, such as split air conditioning, heat absorbing windows, window wipers and ergonomic seat inside.


    • marine winches with limiting switch rope up/down;
    • hydraulic limiting switch rope up/down for the winch system;
    • electro-hydraulic or diesel-hydraulic power unit with starting panel:
        Electro hydraulic or Diesel power unit complete of electrical panel, emergency push button, oil tank and manual pump. Each unit is equipped with a fluid level indicator and thermometer. Standard three a�� phase electric motors available in match customers specified voltage and frequency.

      This package includes: an electric Clomid without prescription, order dapoxetine. motor 380V/3ph/50Hz or 440V/3ph/60Hz, oil resevoir, pump, return line filter, oil level indicator and control panel.


    • stainless steel AISI 316 hoses and fittings;
    • limiting moment device;
    • centralized greasing system;
    • different paint procedure;
    • public address system;
    • boom rest;
    • warning and flood lights;
    • load cell;
    • Sormec crane control system;
    • anemometer;
    • anti-collision system;
    • radio remote control:
        Radio remote control system with radio data transmission offers maximum safety and convenience. It is available either as a cable remoter or radio remote control system


    • HMI touch screen:
        it is an electronic management system that allows the control and the visualization of the crane status and of all possible movements that can be performed at any time. The device allows to perform movements even when the crane is blocked, due to an excessive weight , in order to place the load into a safe location.The display 10.4a�? Touch Screen shows all the important crane parameters as the Safety working load; Actual load, Hook load as percentage of SWL, etc. The system can be connected in remote to allow our technicians to make diagnostic on the machine in case of malfunctions, and eventually modify and correct the problems.


  • various Pedestal height.